Gear Aid Aquaseal + Neo Contact

Gear Aid Aquaseal + Neo Contact

Aquaseal NEO is a fast-acting, durable black contact cement for wetsuit repair. It bonds permanently to neoprene and other coated materials, and cures to an elastic rubber that stretches and bends with fabrics. It’s abrasion-resistant and waterproof.

Wetsuit repair is simple and quick with Aquaseal NEO. Previously known as Seal Cement, this black contact cement is formulated to permanently bond with neoprene and other coated materials. With this flexible liquid adhesive, repairing neoprene gear can be done within half an hour. Apply to waterproof waders, gloves, booties, and spray skirts by the water. Or re-seal a leaky gasket at home. When rips and tears happen, use this contact cement to repair stretchy, high-performance fabrics and protect it from abrasions. Before venturing out to that favorite fishing hole or dive spot, bring Aquaseal NEO along for unexpected repairs and save that expensive gear.

Specificiations

• Material: Heat-resistant neoprene based contact cement
• Size: 1.5 oz
• Color: Black
• Adheres To: Neoprene, rubber, latex, leather, and most fabrics
• Cure Time: 20-30 minutes
• Application Temperature: 60° to 80° F
• Use Temperature: -20° to 150°F
• Storage: Store in cool, dry place

Directions:

Step 1

Clean the tear. Remove all dirt, sand, and moisture from the neoprene. A clean surface ensures a strong, lasting bond.

Step 2

Apply the first coat. Squeeze a thin line of Aquaseal NEO onto both sides of the tear. Let it dry for 5 minutes until tacky.

Step 3

Apply a second coat. Add another thin layer to both sides. Let it dry for 10 minutes, then carefully press the edges together.

Step 4

Let it set. Hold with light pressure for 5–10 minutes. Once bonded, your neoprene is flexible, watertight, and ready to go.